How to read surface water status

Different sections of the same river can have different status classes. Each segment of the bar shows the assessment for one designated water body. Open its page to see its classes, sources and assessment periods.

What is a designated water body?

A designated surface water body can be a stretch of river or canal, an entire lake, or part of a larger water feature. Each has its own management code. Use that code to find the boundaries, monitoring sites and assessments for the section.

Three surface water assessments

Ecological status describes how close the aquatic ecosystem is to natural conditions. The assessment uses evidence about living organisms, the channel, banks and water quality. It has five classes from high to bad.

Artificial and heavily modified water bodies receive an ecological potential class. It accounts for changes associated with how the water body is used. It has four classes from good to bad.

Chemical status is assessed against standards for a defined list of pollutants. An assessed exceedance results in a class of failing to achieve good status.

How to read the colours

Each segment links to a designated water body. Colours are specific to each scale. Green means good ecological status, and blue means good chemical status. The ecological potential scale combines the class colour with grey stripes.

A grey segment shows that the cited source provides no class for that water body. Grey stripes indicate that the source reports conflicting classes for the same water body.

Ecological status

  • High Blue
  • Good Green
  • Moderate Yellow
  • Poor Orange
  • Bad Red

Ecological potential

  • Good Green with grey stripes
  • Moderate Yellow with grey stripes
  • Poor Orange with grey stripes
  • Bad Red with grey stripes

Chemical status

  • Good Blue
  • Failing to achieve good Red
  • No assessment · grey
  • Reported classes differ · grey stripes

How to compare assessments over time

Open “Water body status assessment sources and periods”. Compare the same component and check how much time each assessment covers. Chemical status reports also identify annual average or maximum concentration standards where the source specifies them.

For SAWR Geoportal assessments, we show the date listed in the record where available. The snapshot date shows when we retrieved the data. Confirmed assessment periods come from river basin management plans and reports.

“Chemical layer updates” in the Period column identifies the update years covered by the agency’s annual reports.

What assessment confidence means

Confidence describes how complete the evidence is and how well it supports the class. A source may provide a separate confidence level for each assessment.

In the Southern Buh plan, for example, high confidence in a chemical assessment means that most requirements for pollutants, methods and sampling frequency were met. Medium confidence can indicate gaps in those data. A risk assessment or a classification transferred from a comparable water body can carry low confidence.

What the water body type code means

A type code identifies a group of water bodies with similar natural characteristics. In UA_R_16_M_2_Si, R means river, 16 refers to the Eastern Plains ecoregion, M means a medium-sized catchment, 2 means upland, and Si means siliceous rock. Lake codes also describe mean depth.

Some cadastre entries use Ukrainian abbreviations. ШМПВ marks an artificial surface water body, ІЗМПВ marks a heavily modified one, and кІЗМПВ marks a candidate for that designation.

Sources and further reading

Related guides